The postprocessing improves the image, and also corrects distortion, but the base exposure of the original looks right. And that's roughly ⅔ stop more than the exposure meter told me. Why?

Last September, after Pene Kirk had examined him, we took Nikolai to Eastwood Vets for an X-ray. What did we get? Another examination. No X-ray for at least 6 days.

I wasn't happy at the time, and said so. But they sent an invoice anyway, to which I sent them a reply asking them to cancel it. No reply, no reminder. Had they just silently canceled it?

No, just waited a long time. Today I got a reminder. No mention of the mail message I sent them. Do they read their mail? A mail address of reception@eastwoodvet.com.au doesn't sound like they're power users. So I sent them another reply, and this time confirmed that it was delivered:

I wonder if they read this stuff.

It's been three weeks since JG King did any work on the house. It seems that the plasters have gone on holiday, and though they have apparently returned last Thursday, they still haven't done any work for Kings. Duncan tells me that they're tearing their hair out.

Met him on site for a first formal site inspection , and saw the lounge room for the first time in weeks:

Currently the soil around the house is covered in gravel, which makes sense right now. But are they going to remove it? Duncan wasn't sure, and he also wasn't sure to what level the soil would be back-filled. Currently there's quite a step to the entrances to the house. At the very least the entrance to the garage should be level, implying that soil level and slab level should be the same, but Duncan thinks that's too high. To be considered.

The plasterers didn't cover all the electricals before they left on holiday. There are still some uncovered:

Image title: Switch frame 1          Dimensions:          4610 x 3456, 3787 kB Make a single page with this image Hide this image Make this image a thumbnail Make thumbnails of all images on this page Make this image small again Display small version of all images on this page All images taken on Tuesday, 3 February 2015, thumbnails          All images taken on Tuesday, 3 February 2015, small Diary entry for Tuesday, 3 February 2015 Complete exposure details

 

Image title: Switch frame 2          Dimensions:          4608 x 3456, 4223 kB Make a single page with this image Hide this image Make this image a thumbnail Make thumbnails of all images on this page Make this image small again Display small version of all images on this page All images taken on Tuesday, 3 February 2015, thumbnails          All images taken on Tuesday, 3 February 2015, small Diary entry for Tuesday, 3 February 2015 Complete exposure details

 

Image title: Switch frame 3          Dimensions:          4608 x 3456, 2566 kB Make a single page with this image Hide this image Make this image a thumbnail Make thumbnails of all images on this page Make this image small again Display small version of all images on this page All images taken on Tuesday, 3 February 2015, thumbnails          All images taken on Tuesday, 3 February 2015, small Diary entry for Tuesday, 3 February 2015 Complete exposure details

 

Time for Jim to come and try to find the rest.

Those are three 8 port gigabyte Ethernet switches, donated by David, surname unknown, but with surnom “Carneous”. That's very generous of him.

Still no communication from Widespan about the missing parts of the shed. Called up again and spoke to Jen, who promised to call back by close of business and tell me what was going on. She didn't. I'm getting thoroughly fed up with these people.

Say what you will about Tony Abbott—and I, for one, do so—but he has drawn more attention to politics than anybody I can recall in recent history. Even Yvonne, that most apolitical animal, is paying attention.

Of course, most of what they're saying is just the recognition of what I was saying about the person 18 months ago. Still, I feel a certain Schadenfreude. It seems I'm not the only one.

At the time I had a link to http://www.sbs.com.au/comedy/article/2015/02/04/julia-gillard-rushed-hospital-after-overdosing-schadenfreude, but of course major broadcasters don't keep their news stories.

Somehow just about everything that could go wrong with the shed has done so. Interminable delays, and then Norm Baker poured a slab that proved to be only part of what I had been quoted for, for 30% more than the quote, and cash on hand. Then David Tudor put me off for two months, and didn't appear on the day when he was due to start. Then we discovered that Widespan (or is that Steelx?) had messed up the Bill of Materials and not delivered all the components, and that the delivery driver had damaged a door on unloading, something that Widespan is trying to blame on me.

That was 12 days ago, and we still have no confirmation when the parts will arrive—indeed, if the parts will arrive. Yesterday I had called them and spoken to Jen, who promised to call me back. She didn't.

Tried again today, and after a while on the hold queue got a message in penetrant American telling me that the person on extension 24031 was not available, and that I should leave a message. Waited for the beep, but it hung up on me.

Tried again, and this time it worked. Spoke to Heather, who tells me that the components are 9 trimclad (whatever that means) sheets and 4 top hats (again, what's that? Presumably the builders know). Again she promised to call back, but in contrast to Jen she did, and quite quickly. That's more than I can say for the scheduled delivery time: next Wednesday! That's a delay of nearly 3 weeks! Still, not much I can do about it. But that's the last time I buy anything from Widespan.

From time to time I've chosen TIFF images instead of JPEG for the intermediate stages of my photo processing. That makes perfect sense, but it's not easy. Some of the issues seem to be related to DxO Optics “Pro”. Some years ago I discovered that TIFF images produced by DxO don't align as well as JPEG copies of the same image. Why?

Then a little over a year later I tried again and got many error messages. They're still there. If I take an output TIFF from DxO and try to convert it, I get a large number of relatively harmless warnings:

And xv still can't display them, possibly because they include two images: the original and a thumbnail (why?). GIMP can process them (after first asking questions), but doesn't like them either:

Image title: gimp tiff error Dimensions: 622 x 436, 30 kB Dimensions of original: 622 x 436, 30 kB Display this image: thumbnail    hidden   alone on page Display all images on this page as: thumbnails    this size Show for Wednesday, 4 February 2015: thumbnails    small images    diary entry

Well, some of the time, anyway. While trying to fight my way through the GIMP user interface, I found this, which I can't repeat:

Today, though, I tried the opposite: create a TIFF image with ImageMagick and process it with DxO. That doesn't work either:

Image title: tiff error Dimensions: 650 x 47, 6 kB Dimensions of original: 650 x 47, 6 kB Display this image: thumbnail    hidden   alone on page Display all images on this page as: thumbnails    this size Show for Wednesday, 4 February 2015: thumbnails    small images    diary entry

What's error 2? If this were Unix, it would be ENOENT: No such file. Is it maybe looking for a thumbnail image?

Time for an error report, but based on previous experience with DxO support I'm going to have to construct some rock-solid evidence.

We always used to buy the cheapest eggs we could find, but for some months now, Yvonne has been buying free-range eggs, apparently because of her concern for the well-being of cage chickens. My understanding is that industrial free-range chickens are also kept in cages, but that they get some time outside every day. If you're concerned about chicken welfare, you should be a vegetarian.

But lately we've been having quality problems with the eggs, both with the consistency of the white and with the hardness of the shell. Cage eggs seem to do better there. So Yvonne bought some cage eggs, just for me, and made her opinion clear:

And yes, the problems weren't there.

It's been three weeks since I injured my hand while walking the dogs. It's recovering well:

Grilled chicken legs for dinner today. The legs are always a problem because they tend to dry out on the outside before they're cooked through to the bone. Clearly a case for sous-vide. But what temperature? I had thought 78°, but this chart suggests 65°. Can that be right? Yes, the meat would be cooked, but the bone? To be cautious, I cooked for 2 hours at 66°. As I feared, the bones were still bloody, and the cartilage was very firm. Next time I'll try them at 70°, 75° and 78°.

One of the most impressive things in the forest are the tall Eucalypts. But how do you take photos that reproduce this impression? One of the issues is perspective: the trees are 20 or 30 m high, but I'm looking from the bottom. Took some photos today, but I haven't worked out how to process them:

Yesterday Olympus announced a new member of the OM-D family, the OM-D E-M5 Mark II (these names seem to get longer and longer). The E-M5 is the smaller brother of my E-M1, but it's 15 months newer, and it seems that its image stabilization (a particularly expensive thing to do right) is better than that of the E-M1. It also came with rumours of a completely new idea, higher resolution images taken by overlaying multiple images taken with the sensor shifted a fraction of a pixel.

That's not that interesting to me, but it seems that the same techniques could apply to HDR images: use an electronic shutter to take a number of images with different exposure times, and then merge them into one single image. By contrast with the current method of taking separate images, it has two significant advantages, at least in theory:

• Significantly deeper pixel depth. The E-M1 can bracket up to 12 EV (-6, -3, 0, 3, 6 EV), and that corresponds to roughly 12 bits. That would enable raw images with a 24 bit pixel depth.

• By using an electronic shutter, the image sequence could be much faster, theoretically with no delay between the individual images. Currently each additional image takes 0.1 seconds more than the shutter times. Assuming fast shutter speeds (say, 1/4000, 1/500, 1/60) and a 3 image bracket, the total exposure time could be reduced from 0.21892s to 0.01892s (1/53 s). That would virtually eliminate ghosting, or at least reduce it to the same level as a 1/60s exposure.

But we're a long way from that. Looking at the specs, it looks very much as if this was a feature (“feature 4”) that was implemented before it was ready. There are all sorts of puzzling details:

• The feature takes 8 images shifted 0.5 pixel from another. But in what order? It would seem logical to shift the same distance horizontally and vertically. But that would require a power of 2, either 4 or 9 images.

• The sensor has a resolution of 16 MP. So 8 images would simulate 128 MP, right? Wrong. It's only 40 MP. Why?

• A footnote reads:

  Since shooting takes approximately 2 seconds, a tripod is required.

  Why? You'd expect this to be really fast. And if it's that slow, how do you avoid camera shake of at least 0.5 pixel, even with a tripod?

• The most puzzling of all is this:

  • In RAW+JPEG mode, the following three types are saved: 40M JPEG, 64M RAW (ORF), 16M RAW (ORI).
  • 16M RAW (ORI) is the first shot recorded out of 8 RAW images captured.
  • 16M RAW (ORI) cannot be viewed or processed on the camera. It can be viewed and processed using Olympus Viewer 3.
  • 64M RAW data can be processed on the camera as a 40M JPEG image. It cannot be processed using Olympus Viewer 3.
  • Install the plug-in dedicated in 64-bit edition of Adobe® Photoshop® (CS5 or later) for processing and editing RAW files on a computer. The plug-in lets you to adjust exposure compensation, white balance, contrast, sharpness, colour saturation, and colour settings (sRGB and Adobe RGB). The plug-in is to be released in late February, 2015.
  • A 64M RAW file is approximately 100MB, and a 40M JPEG file is approximately 20MB.

  What am I to make of that? It seems that they're doing it with individual images, not an electronic shutter. That still doesn't explain the 2 seconds. Presumably “40M” and “64M” refer to pixel count, so they're doing something funny with the JPEGs. But why do you have to buy Photoshop to process them? Clearly they haven't really got their act together.

In passing, it's worth noting the unfairness of some of the image comparisons. There's a map and counter taken both with the E-M5 Mark II and a “competitor”. But the Olympus uses the top-of-the-line M.Zuiko 12-40 mm f/2.8 “Pro” lens, while the competitor uses the kit lens. That makes it impossible to gauge whether the difference in image quality is due to the lens or feature 4.

It's not as if I had had any intention of buying this camera; I'm mainly interested because it's the second of three cameras in the range, and mine is top of the range. If this kind of feature is incorporated in the mid-range camera, what will the next iteration of the E-M1 be like? Hopefully more mature.

Fish for dinner today, Scomberomorus. Huh? What's that? In Australia it's sold as Spanish mackerel, which proves to be one of about 21 species. I know it as the Malay word Tenggiri. Typically it's served as slices, and today we decided to try it sous vide. Based on the experience with trout, I cooked them at 50° for about an hour.

The results were interesting. The fish was cooked and very tender—again, almost too tender—but it just about disintegrated, something that grilled tenggiri doesn't do. It also stuck to the bag. Yvonne decided to bone it before serving, but the results didn't look spectacularly good:

It's clear that sous-vide isn't a “one size fits all”.

Leonid's seems to continue to lose his coat on his back. We showed him to Pene Kirk a couple of days ago, and she found nothing wrong. It looks as if the loss is continuing. Here the difference of 10 days:

We saw him rubbing his back against the wire mesh in the kennel today, but I think this is more a result of the hair loss than the cause.

We've been letting Zhivago run free on walks lately. Not a very good idea. Today he disappeared and didn't come back for over half an hour—about the time to eat a rabbit. And of course, when he returned we found him where we always do:

Time to keep him on the line again.

It's been over 3 weeks since any real work has been done on our house. Hopefully the plasterers will come good on their promise to resume work on Monday. In the meantime, they haven't been quiet on Chris Bahlo's house:

They still have a fighting chance of being finished first, although they started 2½ months later.

Selina and Simon Smith in early this morning from Horsham to take a look at Rolly (really Narrawin Romantic Courage), leaving me to take the dogs for a walk. They didn't take long to decide. As I returned, I saw:

He was very pleased to see our dogs, and both Zhivago and Nikolai were pleased to see him. For the first time I saw Zhivago excited enough to jump up to somebody's face, unfortunately too quickly for me to get a photo. But they joined him later:

That's in stark contrast to two years ago, where he hardly recognized him.

Ron was also particularly impressed by how Leonid had developed. When we got him, Ron was concerned about overbite, but that problem seems to have gone away:

Image title: Leonid 1 Display location on map Complete exposure details Dimensions: 640 x 480, 142 kB Dimensions of original: 640 x 480, 142 kB Display this image: thumbnail    hidden   alone on page Display all images on this page as: thumbnails    this size Show for Sunday, 8 February 2015: thumbnails    small images    diary entry

We also attracted the attention of Jeremy Bannister of The (Ballarat) Courier, who was very taken by our collection and took a number of photos of them:

Image title: Courier photo 2 Complete exposure details Dimensions: 780 x 678, 118 kB Dimensions of original: 780 x 678, 118 kB Display this image: thumbnail    hidden   alone on page Display all images on this page as: thumbnails    this size Show for Sunday, 8 February 2015: thumbnails    small images    diary entry

Jeremy Bannister of The Courier came laden with a pair of large Nikon SLRs. He took his photos with a very short lens that resembled my Olympus Zuiko Digital ED 8 mm f/3.5 fisheye lens. He tells me it's 14 mm, but it's not clear whether the camera was APS or “full frame” 35 mm equivalent. In the former case, it would correspond to roughly 11 mm on a Four-thirds sensor, in the latter to 7 mm. In either case, the results seem far too distorted:

Image title: Courier photo 2 Complete exposure details Dimensions: 780 x 678, 118 kB Dimensions of original: 780 x 678, 118 kB Display this image: thumbnail    hidden   alone on page Display all images on this page as: thumbnails    this size Show for Sunday, 8 February 2015: thumbnails    small images    diary entry

Is this what people like? For the fun of it I straightened it out. The result has the top corners cut off, but I think the result looks better anyway:

I fear I have made a blunder. I should get at least one coated filter to compare.

Image title: Kitchen 1          Dimensions:          4778 x 3456, 2095 kB Make a single page with this image Hide this image Make this image a thumbnail Make thumbnails of all images on this page Make this image small again Display small version of all images on this page All images taken on Monday, 9 February 2015, thumbnails          All images taken on Monday, 9 February 2015, small Diary entry for Monday, 9 February 2015 Complete exposure details

 

Image title: Bathroom 1          Dimensions:          3456 x 4788, 2154 kB Make a single page with this image Hide this image Make this image a thumbnail Make thumbnails of all images on this page Make this image small again Display small version of all images on this page All images taken on Monday, 9 February 2015, thumbnails          All images taken on Monday, 9 February 2015, small Diary entry for Monday, 9 February 2015 Complete exposure details

 

Image title: Bathroom 2          Dimensions:          3456 x 4788, 2893 kB Make a single page with this image Hide this image Make this image a thumbnail Make thumbnails of all images on this page Make this image small again Display small version of all images on this page All images taken on Monday, 9 February 2015, thumbnails          All images taken on Monday, 9 February 2015, small Diary entry for Monday, 9 February 2015 Complete exposure details

 

Not everything was perfect, though. One cabinet was damaged:

On my return, Yvonne reminded me of her Moroccan washbasin. Should it be installed now? Called Duncan, who suggested that we take it over and see what Sam thought. Yes, it could go in:

Gradually it's beginning to look like a house.

In the evening Yvonne found a strange animal near the laundry:

It's tiny: the second image shows it on an egg slice (also known as a spatula), about 10 cm across.

Clearly a bat, but what kind? Yvonne had wanted to leave it somewhere where it could escape, but it didn't look in very good condition. In particular, it had a couple of holes in its wings, like this one:

Image title: Bat 4 detail 2 Complete exposure details Dimensions: 721 x 638, 106 kB Dimensions of original: 721 x 638, 106 kB Display this image: thumbnail    hidden   alone on page Display all images on this page as: thumbnails    this size Show for Monday, 9 February 2015: thumbnails    small images    diary entry

It also had what appears to be an injury to its left ear, but it appeared to be older and already healed:

So I put it in the microwave oven while I pondered what to do, and gave it some water to drink:

It drank apparently continuously for an hour or two without consuming very much of the estimated 5 ml of water I put in there.

In the end called up the wildlife rescue people, who told me it was a Microbat—not surprising given the size. A couple of hours later a bloke called Vince came and picked it up. It wasn't until we were talking about other such incidents that we realized that we had seen each other last time we had an animal to rescue, in this case a kangaroo. It seems that that animal didn't make it. Now I know more details about them, though: he's from the Wala Animal Sanctury (a web site still under construction) in Smythes Creek.

So now things are moving again. Metroll has confirmed that the missing parts for the shed will arrive tomorrow, the electrics are on track, and with any luck we'll get the bore done soon.

My ELM327 clone arrived today. It's a modern device, so of course there's no documentation whatsoever—not even information on the PIN I need to connect it (which, after some searching, proves to be 1234; why do they bother with PINs if they're all the same?).

So: what do I do with it? It's a Bluetooth connect, so went looking in the toyshop for appropriate apps. That's a lost cause, of course; I've never found a good Android app, and today was no exception. A Commodore forum suggested Torque, which comes, of course, with no documentation whatsoever.

Found the OBD connector on the car (directly above the driver's legs, just forward of where the underside of dashboard ends) and plugged it in. It seems there's power there even when the car is turned off. Tried connecting, and sure enough, the tablet found the device. But the app cycled endlessly through various displays: “Connecting”, “Cannot find device”, “Cannot access device”.

Tried another app, OBD Car Doctor PRO, which came up with lots of warnings about bad MAC addresses (my device has one, it seems), bad ELM revisions (2.1), and bad countries (China, of course). I get at least 2 out of 3; since there's no indication of the ELM revision, I don't know how to tell. It also stated that the engine must be running, so did that. No connection:

Image title: Car Doctor PRO detail Dimensions: 282 x 46, 3 kB Dimensions of original: 282 x 46, 3 kB Display this image: thumbnail    hidden   alone on page Display all images on this page as: thumbnails    this size Show for Tuesday, 10 February 2015: thumbnails    small images    diary entry

What about trying “Torque” again? Yes, this time it worked, so the Car Doctor warnings are reminiscent of the introduction to “The Picture of Dorian Gray”:

The highest as the lowest form of criticism is a mode of autobiography.

I'm still trying to understand how to display anything useful; it can display all sorts of things, either on different “pages”—just what you need when driving—or on top of each other, without the possibility of relocation:

Image title: Torque Dimensions: 800 x 1280, 816 kB Dimensions of original: 800 x 1280, 816 kB Display this image: thumbnail    hidden   alone on page Display all images on this page as: thumbnails    this size Show for Wednesday, 11 February 2015: thumbnails    small images    diary entry

About the only thing that I got out of it was the claim that there were no error codes whatsoever stored in the ECU.

Can I believe it? It's possible, I suppose. But how can I trust it? Tried it in my car, after more searching (again, it's in roughly the same place, below the steering column, but better hidden). And this time I couldn't get much sense out of “Torque” either.

So: what have I learnt so far?

• This is an Android app, so almost by definition it's undocumented.

• This is an Android app, so almost by definition it doesn't do any error checking or reporting.

• It seems that there are different levels of communication with the ELM device. The following are hypotheses based on my current lack of documentation:

  • The tablet can pair with it as soon as it is inserted.

  • It can only communicate with the car when the engine is running.

  • Once it communicates with the car, the app needs to understand the specific protocol that the car speaks.

So where am I now? I find my prejudices against all things Android reinforced. I don't know if “Torque”'s claim is correct that no error codes have been stored. I don't know how to communicate with my Hyundai. And if there's a usable app out there, I haven't found it.

I have relatively well-controlled diabetes. I don't need to do anything beyond avoiding large quantities of sugar, and my regular blood tests show that my HbA1c levels are in the normal (non-diabetic) range. But the blood tests (fasting) also test blood glucose, and that's frequently too high. Not a problem in itself, since the HbA1c measurements are a better indication of the average, and blood measurements at other times are normal, but a thing that the doctors catch on from time to time.

I had always thought that that was something specific to me. But today, while watching a lecture from the Coursera course on circadian clocks, I found this information:

This graph shows a distinct increase in blood glucose just after dark (grey areas). In fact, it's the highest of the day. Rats are nocturnal, and this level corresponds to the time before the rat has had its first meal of the day—fasting glucose.

Are humans like that? If so, it would explain my high blood glucose levels. But if that's the case, why should my levels be special? One answer would be that I have to drive 30 km to have my blood sampled, and that can be up to 2 hours after waking. All the more reason to give priority to fasting patients for blood tests.

Yesterday I didn't get very far with my OBD apps: Torque only worked in the Commodore, and OBD Car Doctor PRO didn't work at all, but was too polite to say so.

But there are other apps to try. How do you start? The toyshop doesn't give you the opportunity to list them by popularity or price. On a real web browser, you can eliminate payware and apps with less than 4 stars, but they're still not sorted. The browser on the tablet doesn't even offer that, and appears to display fewer stars than the computer browser does. So I had to use two browsers and try to find correlations between the display of both of them. Still, I found a few potential candidates:

• Carista OBS2. This just didn't work. It couldn't connect with the adapter:

   

  Image title: Carista detail Dimensions: 554 x 231, 24 kB Dimensions of original: 554 x 231, 24 kB Display this image: thumbnail    hidden   alone on page Display all images on this page as: thumbnails    this size Show for Wednesday, 11 February 2015: thumbnails    small images    diary entry

• CarscopePlus. This one wanted dependencies that I couldn't install at the time:

  
  

  Image title: Carscope detail          Dimensions:          1009 x 138, 24 kB Make a single page with this image Hide this image Make this image a thumbnail Make thumbnails of all images on this page Make this image small again Display small version of all images on this page All images taken on Wednesday, 11 February 2015, thumbnails          All images taken on Wednesday, 11 February 2015, small Diary entry for Wednesday, 11 February 2015

  
   

• OBD2 Check Engine Fault Codes. This one ran, sort of, but it produced a completely unintelligible display, and I couldn't get any sense out of it:

   

  Image title: OBD2 Codes 1 Dimensions: 800 x 1280, 136 kB Dimensions of original: 800 x 1280, 136 kB Display this image: thumbnail    hidden   alone on page Display all images on this page as: thumbnails    this size Show for Wednesday, 11 February 2015: thumbnails    small images    diary entry

   

  Image title: OBD2 Codes 2 Dimensions: 800 x 1280, 124 kB Dimensions of original: 800 x 1280, 124 kB Display this image: thumbnail    hidden   alone on page Display all images on this page as: thumbnails    this size Show for Wednesday, 11 February 2015: thumbnails    small images    diary entry

And Torque still won't work on the Hyundai, coming up with no useful error messages beyond a probe loop.

So: tried 5 apps, got one to sort of work on the Commodore, and that's all! I don't think there's anything seriously wrong with the adapter. What a pain these apps are. And when I drove off in the Hyundai, still with the adapter in place, the speedometer didn't work. I had to remove the adapter first.

And finally the missing components for the shed (with the exception of the personal access door) have arrived:

Jim Lannen came over in the afternoon and located all the power connections (I hope—still to be checked). So things are continuing. About the only issue I have is getting hold of Gary Murray to sink the bore.

Decades ago in Germany they had a tradition of mocking top politicians: jokes about Heinrich Lübke and Helmut Kohl abound. But so far we haven't had anybody in Australia—until Tony Abbott. In some sense it's good that he survived the spill motion on Monday. That means continued hilarity for a while. And I'm still hoping that he'll be deposed in a few months' time.

Today we received some new toilet paper:

Later I came into the bathroom and saw:

At first I had thought that Yvonne had actually dared to apply it to her body, but it seems she just rolled it up.

Apart from that, this video of a speech by Scott Ludlam popped up again:

It's not new, but it's as relevant as ever. Say what you will about his political views, you have to admire the man's eloquence, especially when compared with this:

Clearly eloquence is not an essential requirement for the Prime Minister.

It's been four weeks since I injured my hand. It's healing, probably as fast as anybody might expect:

So they've caught some terrorist suspects in Sydney. What the press has heard sounds relatively plausible. But of course people who Need To Know, such as the Prime Minister, get more information than we do.

Tony's not known as an overly open person; people accuse him of keeping things to himself. But he's made up for that in this case: he quoted confidential details of the investigation in parliament. Finally a bit of clarity! Complaints that the matter is still sub judice are clearly calculated attempts to denigrate him.

He can't win, can he?

And Yvonne and Chris, in their infinite wisdom, had closed the valves to the tanks. As a result, the water that flowed into the one tank didn't make it into the other one. Over in pouring rain to open them. On the positive side, when I arrived the downpipe was connected. I was only just in time. The right-hand tank was already floating:

Opened the valves and watched the water levels both inside and outside rise quickly:

By that time, only 2 minutes later, the tank had sunk again. Back home, soaking wet, just as the rain stopped. It started again: the day's total was 42.1 mm, which should have the tanks about ⅓ full.

Lights left on? No, it seems to have been freak lighting. It was very dark, but apparently some sunlight reflected off the number plate and the flat area round it.

In preparation for moving house, I've already disposed of a lot of my old computer stuff, but some remains. Yesterday I found a Chris (surname unknown) on Freecycle looking for components, so I suggested he come along and help himself.

To my surprise, he was really keen on having a lot of my old junk. Also gave him the laser printer that I bought 5 years ago. It still works, but it will soon need new toner.

And then he looked longingly at my old HP field service oscilloscope. No, sorry, that's staying. After all, I only have 3 oscilloscopes. And when did I power the last one on? Not in the 7½ years that I've been living in Dereel. Dammit, I might as well give it away. It was a hard decision, but probably the correct one.

There were lots of little bits. Had an accident pouring them from one container, with some unfortunate results:

Over to the Stones Road property to take the house photos today. It seems that the left-hand tank (further away in this photo) lifted off again:

It was held by the pipes, so it couldn't get far. And now, of course, it now has about 7 tons of water in it, so it's not going anywhere. We'll have to put up with it.

Still, it'll serve.

I've been meaning to cook a relatively authentic Moroccan Tajine for some time, and Mohamed Ifadir (from Marrakesh) sent me a list of recipes which look interesting. Problem: they're in Arabic. Never mind, Google Translate is your friend. Or is it?

Tagine Baljelbana chicken and potatoes

Beef or chicken (optional)
Thomh and onion Mhzh
Alqsbo and Almadnos - salt + seeders + Askenjber + saffron or Alkhrkom
- Olive oil
- The shrine of acid

Olive without bone

Method: *
Nderlhm Vtagen + onion Mhldh + Althomh Mgokh + oil + full aromatic + Spring
Nhmr and Nahr everything Meziane

I particularly like the “olive without bone”.

The almost unintelligible translation suggests a problem in itself: where do I get the ingredients? But one thing on that page stood out: about the only thing the recipes had in common was the tagine (utensil) itself. Wouldn't it be possible to [fm]ake my own? So I tried that, with surprisingly good results.

And we have a large number of pink lilies:

They were there last year too, in smaller number. Yvonne doesn't like pink, and I can't remember planting them. I must assume that they're volunteers.

Of our Mirabilis jalapa, only the yellow one has survived. Here's an early morning photo, when the flowers are open:

The Clematis are also starting to flower rather timidly:

And despite neglect, the roses are doing well:

Image title: Rose 1          Dimensions:          3456 x 4611, 5888 kB Make a single page with this image Hide this image Make this image a thumbnail Make thumbnails of all images on this page Make this image small again Display small version of all images on this page All images taken on Monday, 16 February 2015, thumbnails          All images taken on Monday, 16 February 2015, small Diary entry for Monday, 16 February 2015 Complete exposure details

 

Image title: Rose 2          Dimensions:          3456 x 4608, 2512 kB Make a single page with this image Hide this image Make this image a thumbnail Make thumbnails of all images on this page Make this image small again Display small version of all images on this page All images taken on Monday, 16 February 2015, thumbnails          All images taken on Monday, 16 February 2015, small Diary entry for Monday, 16 February 2015 Complete exposure details

 

Image title: Rose 1          Dimensions:          3456 x 4610, 2352 kB Make a single page with this image Hide this image Make this image a thumbnail Make thumbnails of all images on this page Make this image small again Display small version of all images on this page All images taken on Sunday, 15 February 2015, thumbnails          All images taken on Sunday, 15 February 2015, small Diary entry for Sunday, 15 February 2015 Complete exposure details

 

And a feature of last month's photos is here again:

And the Hellebores are still flowering:

The Kniphofia are also late, probably as the result of not being watered before:

Kleins Road, where we live, is not sealed (“dirt road”). From time to time the Council sends a grader along, a machine for resurfacing the road. Today was such a time. When we left to walk the dogs, there was nothing to be seen. When we got back, there was a ridge of soil about 40 cm high waiting to be spread, and obstructing the entrance to the house:

Image title: Grading 1          Dimensions:          3456 x 4636, 5264 kB Make a single page with this image Hide this image Make this image a thumbnail Make thumbnails of all images on this page Make this image small again Display small version of all images on this page All images taken on Monday, 16 February 2015, thumbnails          All images taken on Monday, 16 February 2015, small Diary entry for Monday, 16 February 2015 Complete exposure details

 

Image title: Grading 2          Dimensions:          4756 x 3456, 5568 kB Make a single page with this image Hide this image Make this image a thumbnail Make thumbnails of all images on this page Make this image small again Display small version of all images on this page All images taken on Monday, 16 February 2015, thumbnails          All images taken on Monday, 16 February 2015, small Diary entry for Monday, 16 February 2015 Complete exposure details

 

Image title: Grading 2 detail          Dimensions:          1849 x 1722, 992 kB Make a single page with this image Hide this image Make this image a thumbnail Make thumbnails of all images on this page Make this image small again Display small version of all images on this page All images taken on Monday, 16 February 2015, thumbnails          All images taken on Monday, 16 February 2015, small Diary entry for Monday, 16 February 2015 Complete exposure details

 

Recall that Zhivago (foreground) is about 85 cm tall. If we had wanted to leave the property in a car, we would have had to dig our way out.

Why? I'm not an Apple man, so I asked some of the renegades on the (BSD) IRC channel. Daniel O'Connor suspected the EDID values, and while it seems there is no monitor with correct EDID, we tried with two different monitors, including one that runs fine both with X and Microsoft. Still, Daniel came up with a script that both recognizes that there's a problem and also claims to fix it. Chris tried it, but wasn't able to get beyond 1360×768 before she had to return to Real Work.

Aren't easy-to-use computers great?

We eat a lot of prawns, and lately they seem to always be in the shell. That makes for a lot of shells left over. And that's what we need for fish soup.

It's not immediately obvious—that's why it has progressed this far. But it's clear that it's in line with the Yeardley house in the background. Looking on the map, that house is lined up pretty much to the north-east:

The map doesn't show Chris' house yet, of course. It's just to the south of the group of trees in the middle left, and it should be pointing at them. Instead, it's clearly also lined up the same way as the Yeardley house. But in all documents—planning permit, building permit, contract—the house is pointing north. They've built it fully 45° out of line!

That's terrible for a big building company, but how important is it? Chris went to a lot of trouble to ensure the solar efficiency of the house, and more trouble to explain that to a surprising number of Simonds employees. And they still managed to do it wrong.

Today she had a meeting with Dale, the new site supervisor, and his boss, who really seems to be called Ozzie Guy. I came along as a witness. They admitted their liability, and offered to put in a couple more solar panels for the hot water, thus only matching the number we have on our house. And that was all. You can't even call it an offer: they do this without charge for all houses where they can't orient the panels to the north. I suggested that Chris would need to plant new trees to make up for the loss of view, but no, they weren't even prepared to do that.

So: time for Chris to get some professional advice. My understanding is that she would be within her rights to demand fulfillment of the contract, which would require tearing down the present structure and starting again. I don't seem to be alone. They had put construction on hold until the matter is resolved, and both the bricklayer and Dave Barry, the shed builder, seemed to think that the house would need to be started again. You'd think that they would have come with a more reasonable offer of compensation.

In passing, it's interesting to note that Simonds do make cutouts for the electrics:

I've been making sourdough rye bread for years now, but there's always room for improvement. I established a long time ago that a mixture of 400 g wheat flour and 900 g rye flour is optimal; but how should it be mixed? My latest attempts have taken the 400 g wheat and 400 g of the rye to make a starter, then add the remaining 500 g rye and letting it rise. How would it taste if the sourdough was all rye? Tried that today. Normally I have to leave the starter overnight, but this one came up very quickly. Here it is 3 and 5 hours after mixing:

I was concerned that it would overflow, but it didn't go any further. What caused that? Warmer than usual water? Or the difference in the flour?

What pump? We don't have one. Off into town to find one. Where? We have the new kid on the block, UPI, and also Midland Irrigation and the Ballarat Pump Shop. To UPI first, where I was shown prices that blew my head off—over $1000. But it seems those are list prices, and they offered me a Pentair Southern Cross CBI 2-40PC15 pump for $515, or a 2-50PC15 for $615. They're multi-stage and claim to offer constant pressure, though I can't see that: the data sheet for the 2-40PC15 shows pressures between 150 and 350 kPa, depending on flow rate. They look more modern than the pumps I'm used to, and they don't need a pressure cell, but they're still a lot more expensive than I was expecting to pay.

Off to the Pump Shop, where they showed me another pump, also “constant pressure“ and without pressure cell, but with more conventional design. Similar specs, but $650. And they told me that they could supply the 2-40PC15, but that it wasn't in stock, and that it would be more expensive.

So back to UPI and got there just before closing time. Bought the pump, and back home. Not really a lot of work, but somehow I felt tired at the end. I seem to be showing my age.

My photo processing includes a number of kludgy scripts, mainly Bourne Shell. It makes things a lot easier than using Microsoft-space user-friendly GUIs, but of course there's room for bugs.

Lately I've found that when I run the mkcompare script, which creates a web page comparing “before” and “after” running through an automatic optimizer, it presented comparisons with photos I had taken a couple of days before: a blast from the past. How can that happen?

Simple, of course: I don't need the comparison page for more than a few minutes, so I create it in a fixed directory. But I had forgotten to clean out the directory before doing the image conversions, and since I use make, it didn't replace any images which were already there. A simple one-line rm solved the problem.

How long had that been there? Before removing the files, I checked:

2½ years! And how much junk had I collected in that time?

That's 1511 MB of files!

Still nobody on site from JG King this week. They have concreted the entrance:

That looks like a job for a tiler.

It seems that they have also delivered some doors and other components for the fit, but Duncan tells me they won't start working on it until next week. In the meantime, Simonds, who started building Chris Bahlo's house 33 days ago, have now caught up with JG King, who started building ours 4 months ago. I wonder who will be finished first.

Also took another look at the shed. Parts of it are pretty bare-bones:

One way or another, that's the last thing I'll buy from Widespan sheds.

Mari Hendriks over to do the guttering for the shed and connect up the pump. The external plumbing is now as good as done, though it's clear we'll need some kind of protection for the valves for the tanks, which are about 20 cm under ground level:

The bread experiment I started a couple of days ago made a surprising difference. I've already noted the extreme degree to which the starter rose; fortunately it didn't get beyond this stage:

But although I used the same ratio of water to flour (5 to 4), the starter came out much thicker. That's to be expected if you use rye instead of wheat, but in this case the difference was so extreme that I wondered if I had made a mistake with the measurement. I hadn't: after mixing in the remaining flour, the dough was of the same consistency it always has been. But that wasn't the end of the story. Although the bread rose normally before baking, putting it in the oven caused it to lift its lid:

I've only had that once before, coincidentally almost exactly five years ago. At the time I established that it could be too hot an oven or “too much yeast”. At least the latter corresponds to the extreme activity I had with the starter. I need to consider what to do next.

People who know me slightly frequently recognize me by my footwear: I don't wear shoes. At Tandem Computers I got used to meeting somebody important, like a vice-president, who would look at me, look at my feet, look back up and say “Hi, Greg”.

This isn't just a lifestyle choice: I hate shoes, and sometimes I think they hate me. But there are times where I have to wear them to protect my feet, like when I take the dogs for a walk.

Some months back, Yvonne bought some boots for me. They didn't fit well: my arches are too high for conventional shoes, and initially it was almost impossible to put them on. After only a few months, the forces required to take them off again proved too much, and they tore apart:

That's not because the shoes are too small—all the other dimensions are correct. Yvonne has now bought me a new pair of shoes, with zip fasteners, which makes it easier to put them on. Today, for some reason, she asked me to use a different pair of socks. What a pain! I didn't get more than 40 m before I had to go back and tend to my left big toe. It seems that it was a seam, and it made quite an impression:

That's not the only digit causing pain, of course. It's now been five weeks since I tore my hand open. It's progressing:

Borzois aren't exactly designed with fast drinking in mind. Their long, narrow mouths make it difficult to get water into the throat. And for some reasons, while walking them, they find a pool of standing water that tastes so much better than the fresh water we give them at home. And each of the dogs has his own way of drinking it. Here's Leonid putting nose and end of mouth about 8 cm into the water:

I've been buying and selling things on eBay for over 15 years, and it's still one of my main sources of many kinds of item. But note that still: you'd think that they're going out of their way to annoy you.

Last June I had such problems trying to sell a camera that I gave up, especially as they have now restricted sales to Australia only—why?

I also receive daily messages with custom search results. Once upon a time they were legible. Now they're modern, so when looking for Olympus lenses I get a display like this:

Image title: ebay 1 detail Dimensions: 138 x 314, 20 kB Dimensions of original: 138 x 314, 20 kB Display this image: thumbnail    hidden   alone on page Display all images on this page as: thumbnails    this size Show for Thursday, 19 February 2015: thumbnails    small images    diary entry

What is that lens? They're far too leet to print the whole description (or even all the items they have found), and in this case they have not given the most interesting part: what kind of lens is it?

Ah, but they include a plain text version. But it's clearly not intended for mere mortals:

Even worse, if it's an auction, they don't show the price:

Note that 10 of the 12 items listed specify “No International Shipping”. That's their choice, not that of the seller. All of this suggests that they're trying to make life as difficult as possible for the user.

But wait! There's more! The sellers are getting on the bandwagon too. I've already commented on pricing strategies that appear intended to increase the average price of an item, in this case $6,500 for a lens worth about $350. And today I came across yet another trick. I'm looking for a studio backdrop: a couple of stands, a boom and some cloth to hang over it. Not expensive, but the prices I've seen blew me away:

Just what I wanted! And look at that price! $4.11 including free postage. That's much less than the real cost of the postage alone. There's got to be a trick, right?

Yes, of course. See that “select”? You need to select item details before you can buy anything. And when you do, the price goes up nearly 20 fold:

Image title: ebay 4 Dimensions: 455 x 208, 32 kB Dimensions of original: 455 x 208, 32 kB Display this image: thumbnail    hidden   alone on page Display all images on this page as: thumbnails    this size Show for Thursday, 19 February 2015: thumbnails    small images    diary entry

Image title: ebay 5 Dimensions: 493 x 335, 34 kB Dimensions of original: 493 x 335, 34 kB Display this image: thumbnail    hidden   alone on page Display all images on this page as: thumbnails    this size Show for Thursday, 19 February 2015: thumbnails    small images    diary entry

Basically, what you get for $4.11 is a couple of “Camera floating”. That's only mentioned at all in the fine print:

Floating Foam Strap is made to keep waterproof digital cameras afloat and easy to find in the water. It can be attached to the strap lug of your waterproof Coolpix camera preventing it from sinking while you are swimming, surfing or rafting. Even if you're walking along a stream and slip, the strap will keep the camera afloat and make it easier to retrieve.

What earthly connection does that have with studio equipment? None at all. And it isn't even mentioned in the item description. It's just designed to lure people to look at the “item”. I see it differently: sellers best-studio, gmmotherhonest, honestseller2you and friends (look at those names!) are now on my blacklist. But they're irritating. Why doesn't eBay do something about these things? Their automated “report this item” system doesn't even give you the choice of reporting them. This gives an opportunity for other sites with more sensible policies.

Another National Broadband Network outage today, from 13:38 until 14:04:

Clearly a communication issue: the ODU (“Outdoor unit”, i.e. antenna) indicator on the NTD was on red. OK, we know the drill, power cycle the NTD, though I've never seen that it's necessary. And indeed the red LED stayed on, along with a very slow (10 s?) flashing red status LED next to it. Called up Aussie Broadband to report the failure, and spoke to John, who told me to power down the NTD and leave it disconnected for 30 minutes. I refused, and asked him why I should do so. Ah, the old bogeyman “excess capacitance”. I have only heard of that in connection with satellite communications. It was stupid then, and it's even more stupid now. The NTD has an Ethernet connection to the ODU (antenna). What “excess capacitance”?

In passing, it's clear that you can't drain capacitance. They way they spoke, they clearly meant charge. Capacitance doesn't change in a fixed system.

In any case, asked to be connected to the supervisor. Almost immediately I was connected to Will, who claimed that this was an NBN requirement, and that they had to do it before lodging a complaint. Clearly it means that any transient fault of less than 30 minutes will never get reported. So it was today: while I was speaking to Will, the connection came up again. Still, he's going to send me details of what the NBN wants.

While on the phone, discussed my ongoing DHCP issues. Restarted dhclient for him, and he confirmed that the first request packet got an almost immediate reply. But that's not quite what I saw:

Did Will miss the first request, or did it not arrive? Potentially there is a network issue here.

Progress with the house is much slower than we had hoped, but Duncan tells me they'll be ready for the painters by the end of next week. And it won't be much longer before we put in the light fittings. Like the pump a couple of days ago, we don't have any. So into town to take a look. In this particular case it's quite difficult to choose, since Yvonne and I have different opinions about what kind of fitting we wanted. I tend to the so-called “oyster” lamps:

Image title: Lamps 1 detail Complete exposure details Dimensions: 641 x 699, 84 kB Dimensions of original: 641 x 699, 84 kB Display this image: thumbnail    hidden   alone on page Display all images on this page as: thumbnails    this size Show for Thursday, 19 February 2015: thumbnails    small images    diary entry

Yvonne—atypically—had been led astray by these silly lamps built in the ceiling, and thus only able to illuminate a spot on the floor directly below. But she's coming round, and she would be happy with something like this:

Image title: Lamps 7 detail Complete exposure details Dimensions: 564 x 942, 74 kB Dimensions of original: 564 x 942, 74 kB Display this image: thumbnail    hidden   alone on page Display all images on this page as: thumbnails    this size Show for Thursday, 19 February 2015: thumbnails    small images    diary entry

The problem with the “oyster” lamps is that most of them don't go flush to the ceiling, and the gap looks ugly. But I'm not sure the cylinders are particularly pretty.

While in town, had the last of my 3 Cobalamin injections. Time to finally have the last blood test and see where we go from here.

But as I feared, not all the electricals had been done. A number of things to discuss with Jim; possibly there's a reason. I'll be interested to see what kind of patch panel he puts in the pantry. Currently all the cables are hanging out of the cutouts for power points:

While looking at the house, the dogs ran outside. Suddenly there was a scream from Leonid, somewhere round where the pond had been. Further investigation showed that he had caught himself up in some old fence wire, and it looked as if part of it went through his front leg. Duncan had some pliers, and we cut the wire; fortunately no harm had been done, and Leo ran off without even limping. But it's time to remove all that wire.

Long phone call with Will of Aussie Broadband support today. We investigated a DHCP handshake from both ends. Here a summary, seen from my end:

So clearly there's something very wrong with DHCP handling. Whose fault? It's hard to say, but I can't see why it should be Aussie's. The National Broadband Network does strange things with DHCP, and it's quite possible that this is part of it. But I may never know. They took the easy way out: instead of tracking down the problem, they worked around by offering me a static IP address. I'm ambivalent: a static address is far simpler, but it means that the problem may persist for a long time. They say that nobody else has reported the problem, but is that surprising?

A letter in the mail today, with an envelope from some credit collection agency, but on Telstra “letterhead” (generated by the printer):

Image title: Telstra letter detail Dimensions: 451 x 256, 56 kB Dimensions of original: 451 x 256, 56 kB Display this image: thumbnail    hidden   alone on page Display all images on this page as: thumbnails    this size Show for Friday, 20 February 2015: thumbnails    small images    diary entry

So my suspicion last August wasn't that accurate. I expected that they really wanted my postal address, but I didn't think that even Telstra would take 6 months to realize their mistake.

No indication of any fault on the NTD. Had they decided to implement yesterday's change to a static IP address without telling me? Tried stopping dhcpd and setting the IP address manually. No go. Called up Aussie Broadband support and spoke to Aaron, who told me that he was only level 1 support, and that the level 2 people (including Will and Ricky, who had been looking at my DHCP issues) didn't work on weekends. Neither do the network people. It seems that I'll be off the net until Monday!

That would be my longest broadband outage ever. How could it happen? So far I've been very happy with Aussie Broadband, but unless I get a bloody good explanation, it looks like time for a change of ISP. How can you shut down your whole support department over the weekend? I don't really count the “Level 1” support, because that's mainly script-driven and oriented towards end user faults.

But wait! I have another NTD here, the one that will be installed in Stones Road once the house is finished enough. The configuration should give me a connection with my other service. Tried that and learnt a number of things about NTDs:

• Yes, the NTD came up and established radio communication, as far as I can tell from the status lights.

• Unusually, my service here in Kleins Road is assigned to port 3 of the NTD. The service in Stones Road, like just about all of them, is assigned to port 1. So I connected my Ethernet cable to port 1. No signal.

  Tried again with port 3. I got a signal. And apart from that, nothing of use. So it seems that the configuration is not stored in the NTD; they're interchangeable. End of any hope for a workaround.

• When I disconnected the NTD from the outdoor unit, the status lights didn't change. In particular, this silly alternate flashing of the Status and ODU indicators continued. It took an estimated 10 seconds for it to notice the problem and show an error indication. So what are the flashing LEDs for? To provoke epileptic attacks? I had thought they indicated outgoing and incoming packets of some description, but clearly it's not that.

So: off the net for a weekend. I certainly hope they get their act together on Monday morning.

Over to the O'Deas in Enfield this afternoon for a barbecue and to let the dogs run together:

Image title: Dogs 5          Dimensions:          4608 x 3457, 5008 kB Make a single page with this image Hide this image Make this image a thumbnail Make thumbnails of all images on this page Make this image small again Display small version of all images on this page All images taken on Saturday, 21 February 2015, thumbnails          All images taken on Saturday, 21 February 2015, small Diary entry for Saturday, 21 February 2015 Complete exposure details

 

Image title: Dogs 7          Dimensions:          4608 x 3458, 6736 kB Make a single page with this image Hide this image Make this image a thumbnail Make thumbnails of all images on this page Make this image small again Display small version of all images on this page All images taken on Saturday, 21 February 2015, thumbnails          All images taken on Saturday, 21 February 2015, small Diary entry for Saturday, 21 February 2015 Complete exposure details

 

Image title: Barbecue 5          Dimensions:          4743 x 3456, 3648 kB Make a single page with this image Hide this image Make this image a thumbnail Make thumbnails of all images on this page Make this image small again Display small version of all images on this page All images taken on Saturday, 21 February 2015, thumbnails          All images taken on Saturday, 21 February 2015, small Diary entry for Saturday, 21 February 2015 Complete exposure details

 

It's interesting to note how Leonid and Nikolai (¾ brothers) look so different, and Zhivago and Bindy (father and daughter) also look so different. On the other hand, Nikolai and Bindy look so similar that we sometimes mistake them for each other, despite the significant difference in size, and Zhivago and Leonid also bear a significant resemblance to each other.

And for some reason, Nikolai is not overly sociable in these games, as the first two photos show.

Talking to Steve about networking. He's 3 km from the Enfield National Broadband Network tower—and he can't get a connection! The trees around the house are too high. When are they going to understand that end users can use towers too?

Woke up in the middle of the night with an acute case of diarrhoea. Where did I get that from? We found out a bit later when Zali O'Dea called up and asked how we were feeling. It seems whatever it was had got them too, but fortunately not Yvonne. I wonder what caused it.

Off with Chris Bahlo to Buninyong to visit some Renewable Energy Fair. Chris is in the market for off-grid solar electricity, and I had already told her about my dealings with David Grigg of BREAZE and given her the contact details, but it seemed like a good idea to go and see what other people had on offer, especially since we're still off the Internet after 36 hours.

As expected, it wasn't a big operation. This is all of it:

And there wasn't very much there to interest me. Only a couple of solar electricity people, including BREAZE, and very little on heating. One of the things that Chris could use would be a wind pump for her bore, but I couldn't see anything of that nature. On the other hand, things like hand-made soap, Indian food and local plants.

Clearly it's a Myriophyllum, but what's the species? Illegible. The last 4 letters appear to be “atam”, but I can't find that in the Wikipedia species list.

Revisiting 6 years later, I guessed Myriophyllum crispatum, which at least occurs in the species list.

And then there's Themeda australis, or Kangaroo grass:

That's not the species that I had identified before. According to Australian National Botanic Gardens it's Themeda triandra, which just seems to be a synonym. But these have a more obvious similarity with the grasses I looked at a couple of months ago:

They also have nothing in common with the illustration on the ANBG site:

My photo backup failed again today with an “out of inodes” message. I had that only a week ago, and it proved to be incorrect. How could it happen again? It has nothing to do with the disk: this is a different disk. And once again the message was incorrect:

So I umounted it and remounted it, and this time got a console message:

How did that happen? Ran fsck—no errors—and remounted:

That's 1,805 inodes difference! Maybe the difference between in-core and on-disk views of the world? After that the inode count was somewhat more than the initial value, so that's possible.

But what's causing it? While trawling the log files, found:

But that appears to be the result of the problem, not the cause. The backup was started at 12:23:06, and there were no prior log messages. Last week is more interesting:

While the “not properly dismounted” message came after the inode messages again, it was so soon after that it seems related.

I'm still puzzled. About the only clue to follow is that in each case the backup that failed was the first backup after changing the backup disk. Did I leave the old disk mounted? If so, the system should have seen the problem and refused to access the disk. More importantly, has data been corrupted? You'd expect rsync to catch that.

We bought a butter dish (in fact two, in case one is dirty) from ALDI a while back. Nothing special, but they do the job. Or they did, until ALDI decided to change the shape of its butter, and now it's too high to fit in the butter dish.

OK, nothing for it: cut the butter in two. It's silly to have to do it, but it works. But lately we've found something strange about the butter. It seems to have a lump in the middle:

I wonder what causes that.

At 9:00 this morning we were still off the net, so called up Aussie Broadband support and spoke to John. Asked to be connected to Will or Ricky, the people I had spoken to on Friday. Will would not be in until the afternoon, and Ricky was on another call. I asked him to inform Ricky of the urgency of the matter and then connect me to company management. He didn't understand, and I had to repeat. Sorry, the whole company management had been at a fair over the weekend, and they had the day off. Technical support manager was on leave. Jacky, his deputy, wasn't in yet.

No call in 20 minutes. At 9:22, called up and spoke to Eli, who went looking for Ricky. Ricky knew of the case and would call me back.

At 9:44 I called again and finally got put through to Ricky. If he was aware of the urgency, he didn't show it. He told me that they hadn't changed the configuration. Well, hardly. They had done something to ensure that my IP address didn't change—something that has never happened anyway. He went to talk with the network people, then returned and asked me to restart dhclient. Success!

All done in 10 minutes. But due to this simple configuration error, I was off the net for over 53 hours:

And what was the problem? ACL issues or some such, it seems. The network people are apparently puzzled too, and they've suggested I stay with DHCP for the time being.

But that's just the immediate issue. They made the change some time on Friday afternoon, and it seems they were expecting it to take effect immediately, and not at 4:30 the following morning. But the real issue is that they don't have any support at weekends. If this had happened this morning and not on Saturday, it would have been fixed within the hour.

So: what do I do? One obvious course is to change my ISP. Went looking at that. The real question is who can do it better? I note that Internode has two different service levels (“Standard” and “Priority Business”), and the latter costs $30 more per month, for a total of $45 more per month than I'm paying now. For that price I could get a second connection with a different ISP. I suppose I should wait for a promised call back from the support manager, who won't be back until next week.

Following last week's lack of offer from Simonds, Chris had another meeting with more senior representatives, Rohan and his boss Craig. She was certainly gentle in her interaction, and despite having received legal advice about monetary compensation, she let herself be talked into accepting upgrades on the house.

Craig was in agreement that the original orientation was better, and they offered more windows, including a large corner window facing north, double glazing, sufficient solar panels (sufficient for what?), a timber screen to the north-east (the exact purpose of which I'm not sure), and a row of trees to block off the view of the Yeardleys. It's not clear whether that included irrigation—I asked, and they didn't say no. But they'll supply a written quote soon. I asked them to provide an estimate of cost so that Chris could compare with what her solicitor suggested. We'll see.

Mari Hendriks and Warren Pitcher were also there, having lunch after finishing the septic tank:

The shed's under way too. In general, things are moving on:

That's sad. It left me unhappy all afternoon.